Skip to main content Skip to search Skip to main navigation
Free shipping
Made in Germany
Excellent quality
Sustainability
info@bestwoda.com

Osmosis water filter BestWater® 33-00 ULTIMATE

Product information "Osmosis water filter BestWater® 33-00 ULTIMATE"

INNOWACYJNY - MOCNY – WYDAJNY


With the new Jungbrunnen 33-00 ULTIMATE, BestWater has developed a new generation reverse osmosis water filter.

The Jungbrunnen 33-00 ULTIMATE water filter produces up to 150 liters of the best, purest drinking water per day, or 6.25 liters per hour. At the same time, the ratio of permeate to retentate is 1:2.5. To put it simply: one liter of the best water is produced from three and a half liters of tap water. To ensure that there is enough drinking water for every occasion, a 5-liter storage tank is integrated. All connections are pre-installed at the bottom of the Jungbrunnen 33-00 ULTIMATE, so nothing sticks out.

The quality of raw tap water varies from country to country. The Jungbrunnen 33-00 ULTIMATE is equipped with a new pre-filter technology that allows the use of variable pre-filters. This means that the filters can be individually selected to match the quality of the raw water. The new Jungbrunnen 33-00 ULTIMATE also has 3 filter elements arranged in two quick-change cartridges.


★ Installation

Installing the new reverse osmosis water filter from BestWater is also easier than ever before. All components, as well as the pre-filter, are pre-installed and ready to go. All you have to do is connect the pipes with the quick-closing system and the water filter is ready to go. All connections are made downward, so the system can be installed anywhere under the sink. At the same time, the new ULTIMATE, with dimensions (H x W x D) of 380 mm x 270 mm x 400 mm, is relatively small and can fit under the sink even in the smallest kitchen.

★ Maintenance

Maintenance is very easy, you don't even need to dismantle the Jungbrunnen 33-00 ULTIMATE. Just turn off the water supply to the system and empty the tank through the extraction tap. Now you can replace the pre-filter and post-filter without much effort. The entire process takes no more than 10 minutes.


Specyfikacja

  • Weight without water: approximately 16 kg

  • Dimensions (H x W x D): 380 mm x 270 mm x 400 mm

  • Minimum water flow pressure: 2.5 bar *

  • Maximum water flow pressure: 7.0 bar *.

  • Water production in 24 hours: 150 l *

  • Water production per hour: 6.25 l *.

  • Water production per minute: 0.1 l *.

  • Ratio of clean water to waste water: 1:2,5 *.

  • Raw water demand per minute: about 0.4 l *.

  • Cold water connection: 3/4"

* Consumption data may deviate from the stated values depending on water pressure, water hardness, inlet water temperature, room temperature. The values given above correspond to a pressure of 4.0 bar at the water connection.


Scope of delivery:


- 20 µm sediment pre-filter to be replaced every six months
- 5 m 1/4" yellow hose for permeate (ultrapure water
- 5 m 1/4" hose in red for retentate (wastewater)
- 5 m 1/4" hose in white for water inlet (tap water)
- Water-Stopper with faucet
- Y manifold for connecting a washing machine or dishwasher to the Waterstopper
- Adapter 3/4" female thread for 1/4" hose
- Wrench for housing
- Designer faucet in matte finish including kit
- Mounting and connection adapter
- Drain clamp
- Reducing spigot
- Disinfectant gel and sanitary gloves
- Pipe brush for the designer faucet
- Brief instructions

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.